NP231 transfer case--a few questions...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: NP231 transfer case--a few questions... [Re: EricsTJ] #743262 08/08/06 05:08 PM

Anonymous

Unregistered

I believe it is held in by a snap ring from the inside of the t-case, not pressed in. Luckily, the 231 isn't that difficult of a case to open up, the only special tool needed is a pair of snap ring pliers.

Entire Thread
Subject	Posted By	Posted
NP231 transfer case--a few questions...	EricsTJ	08/08/06 03:13 PM
Re: NP231 transfer case--a few questions...	Anonymous	08/08/06 05:08 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.536s Queries: 16 (3.534s) Memory: 0.5896 MB (Peak: 0.6226 MB) Data Comp: Off Server Time: 2026-06-09 19:24:52 UTC
Valid HTML 5 and Valid CSS