Alignment and Noise

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Alignment and Noise [Re: missouriman] #744665 08/15/06 12:29 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Could be the rear locker, I don't get any squealing on mine unless I push it hard. The inside tire will always be less weighted in a turn and will be the first to slip. Might also be the caster or camber is off a little.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Alignment and Noise	DA4RNR	08/14/06 11:06 PM
Re: Alignment and Noise	4Crawler	08/14/06 11:09 PM
Re: Alignment and Noise	missouriman	08/14/06 11:47 PM
Re: Alignment and Noise	4Crawler	08/15/06 12:29 AM
Re: Alignment and Noise	missouriman	08/15/06 01:01 AM
Re: Alignment and Noise	4Crawler	08/15/06 01:15 AM
Re: Alignment and Noise	DA4RNR	08/15/06 05:15 AM
Re: Alignment and Noise	TNToy	08/15/06 03:24 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.398s Queries: 16 (3.396s) Memory: 0.6088 MB (Peak: 0.6418 MB) Data Comp: Off Server Time: 2026-05-27 00:32:01 UTC
Valid HTML 5 and Valid CSS