ring & pinion ratio

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

ring & pinion ratio #745468 08/17/06 07:36 AM

Joined: Mar 2004

Posts: 64

GREECE

georgek

Getting the Wheeling Fever

Checking the front stock differential (2002)I found that the ring has 37 tooth and the pinion 8 tooth. That means a ratio of 4,625.
Checking the rear stock LSD of another Sportage with 28 SPline I found the ring to have 40 tooth and the pinion 9 tooth. That means a ratio of 4,44!!!!!

Does anyone else know anything about that?

Is that normal?

Entire Thread
Subject	Posted By	Posted
ring & pinion ratio	georgek	08/17/06 07:36 AM
Re: ring & pinion ratio	Axe Man	08/17/06 11:02 AM
Re: ring & pinion ratio	turtleskia	08/17/06 04:27 PM
Re: ring & pinion ratio	logansportage	08/17/06 11:05 PM
Re: ring & pinion ratio	DamKia	08/18/06 02:44 AM
Re: ring & pinion ratio	logansportage	08/18/06 06:10 PM
Re: ring & pinion ratio	Dave Scott	08/18/06 06:47 PM
Re: ring & pinion ratio	logansportage	08/18/06 10:10 PM
Re: ring & pinion ratio	Dave Scott	08/19/06 12:39 AM
Re: ring & pinion ratio	DamKia	08/19/06 06:47 AM
Re: ring & pinion ratio	turtleskia	08/19/06 05:08 PM
Re: ring & pinion ratio	logansportage	08/21/06 07:21 PM
Re: ring & pinion ratio	Dave Scott	08/21/06 10:11 PM
Re: ring & pinion ratio	logansportage	08/21/06 11:43 PM
Re: ring & pinion ratio	Anonymous	08/22/06 02:25 PM
Re: ring & pinion ratio	logansportage	08/24/06 12:18 AM
Re: ring & pinion ratio	Dave Scott	08/23/06 03:28 PM
Re: ring & pinion ratio	logansportage	08/24/06 12:50 AM
Re: ring & pinion ratio	turtleskia	08/24/06 04:12 AM
Re: ring & pinion ratio	Cen_Tex_KIA	08/25/06 08:33 PM
Re: ring & pinion ratio	Dave Scott	08/24/06 01:34 PM
Re: ring & pinion ratio	logansportage	08/31/06 01:48 AM
Re: ring & pinion ratio	DamKia	08/31/06 02:46 AM
Re: ring & pinion ratio	Dave Scott	08/31/06 05:15 PM
Re: ring & pinion ratio	DEFBOY35	09/01/06 01:35 AM
Re: ring & pinion ratio	Dave Scott	09/01/06 01:33 PM
Re: ring & pinion ratio	Anonymous	09/01/06 07:07 PM
Re: ring & pinion ratio	DamKia	08/22/06 01:14 AM
Re: ring & pinion ratio	Airdale73013	08/21/06 09:05 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.992s Queries: 15 (4.990s) Memory: 0.6560 MB (Peak: 0.6933 MB) Data Comp: Off Server Time: 2026-06-25 00:29:43 UTC
Valid HTML 5 and Valid CSS