Toyota 4.11 ratio 37:9
Nissan 4.1 ratio 41:10

This is a fairly common swap done out here on toyota fronts with no real dramas. Nissan fronts are basically D60 sized compared with the D44 sized Toyota fronts (general physical sizing only)

Logan, the numerically lower ratio will go further per driveshaft revolution if the driveshaft than the higher ratio.

Take it to extremes to illustrate the point. Assume front has a 1:1 ratio and the rear has a 100:1 ratio. Turn the driveshaft one revolution and the front wheels turn one revolution, while the rears turn 1/100th of a revolution, so the front "drags" the rears.