Motor Mounts Trooper 3.4 v6 swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Motor Mounts Trooper 3.4 v6 swap [Re: CPOM] #745860 06/09/09 06:24 AM

Joined: Oct 2001

Posts: 945

Clear h2o Kansas USA

maxwell417 Offline

Rock Warrior

Broken motor mount bolts a third time. My mechanic came up with this simple mod.

Angle iron drill to catch two upper holes. And one hole drilled and tapped into the factory mount. Plus a small brace to keep the angle iron from folding. Three weeks and still holding <img src="/forums/images/graemlins/smile.gif" alt="" /> .

Curt B 89RS Calmini Header Delta Cam 33x10.5 BFG MTs & 90 Trooper 3.4 v6, SAS D44 ARB/Hobart 5.38s 35s my pictures

Entire Thread
Subject	Posted By	Posted
Motor Mounts Trooper 3.4 v6 swap	maxwell417	08/19/06 05:28 PM
Re: Motor Mounts Trooper 3.4 v6 swap	Jim_Paget	08/19/06 08:37 PM
Re: Motor Mounts Trooper 3.4 v6 swap	CPOM	08/19/06 09:20 PM
Re: Motor Mounts Trooper 3.4 v6 swap	maxwell417	08/20/06 06:24 AM
Re: Motor Mounts Trooper 3.4 v6 swap	CPOM	08/20/06 08:39 AM
Re: Motor Mounts Trooper 3.4 v6 swap	maxwell417	06/09/09 06:24 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.358s Queries: 16 (3.356s) Memory: 0.6052 MB (Peak: 0.6382 MB) Data Comp: Off Server Time: 2026-05-25 16:06:56 UTC
Valid HTML 5 and Valid CSS