I spent some more time on the truck this morning and am really confused. It still starts fine, but the gauges and turn signals don't work. If I pull the 10 amp fuse in the top right corner of the fuse block and then put it back in and start the truck the gauges are working again. If I try to use the turn signal all of the gauges go dead again and the turn signal doesn't work either. That fuse is still good, but I have to pull it and put it back in for the gauges to come back on. I am trying to go through the FSM, but I am not having much luck. I suck at this electrical stuff. I was hoping someone would have another idea.

Chris Sutton
Golden Colorado