how do you torque a crank pulley bolt?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: how do you torque a crank pulley bolt? [Re: StockRaider] #746375 08/22/06 02:34 AM

Joined: Jan 2001

Posts: 3,876

Oakwood, IL

Tag

Roll Me Over

How did you hold it still to get it out? Cant you reverse that? Heck I purchased my bolt and was never able to get the old one out. So I just keep checking it to make sure it is tight and will change it when timing belt time comes along in apx 20000 more miles.

89 2dr 3.0 AT, manual hubs. 33x12.5 MT
gen 2 coils,Cranked front tbars
Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge

Entire Thread
Subject	Posted By	Posted
how do you torque a crank pulley bolt?	StockRaider	08/22/06 01:52 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 02:31 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:34 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 02:38 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 02:47 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:53 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:55 AM
Re: how do you torque a crank pulley bolt?	Raider_X	08/22/06 03:16 AM
Re: how do you torque a crank pulley bolt?	LandRaider	08/22/06 03:22 AM
Re: how do you torque a crank pulley bolt?	sparkem	08/22/06 03:31 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 04:28 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 04:49 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 07:01 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 03:36 AM
Re: how do you torque a crank pulley bolt?	52degrees	08/22/06 03:50 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: