how do you torque a crank pulley bolt?

Print Thread

Rate Thread

Re: how do you torque a crank pulley bolt? [Re: Mad_Scientist] #746378 08/22/06 02:53 AM

Joined: Jan 2001

Posts: 3,876

Oakwood, IL

Tag

Roll Me Over

Yes they are supposed to. Matter of fact I got one of the tools on loan from DougB to hold mine still. But my pulley was slightly different then most people on this forum have so it did not work.

89 2dr 3.0 AT, manual hubs. 33x12.5 MT
gen 2 coils,Cranked front tbars
Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge

Entire Thread
Subject	Posted By	Posted
how do you torque a crank pulley bolt?	StockRaider	08/22/06 01:52 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 02:31 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:34 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 02:38 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 02:47 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:53 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:55 AM
Re: how do you torque a crank pulley bolt?	Raider_X	08/22/06 03:16 AM
Re: how do you torque a crank pulley bolt?	LandRaider	08/22/06 03:22 AM
Re: how do you torque a crank pulley bolt?	sparkem	08/22/06 03:31 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 04:28 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 04:49 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 07:01 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 03:36 AM
Re: how do you torque a crank pulley bolt?	52degrees	08/22/06 03:50 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: