how do you torque a crank pulley bolt?

Print Thread

Rate Thread

Re: how do you torque a crank pulley bolt? [Re: Tag] #746379 08/22/06 02:55 AM

Joined: Jan 2001

Posts: 3,876

Oakwood, IL

Tag

Roll Me Over

Wait a minute I just thought of something. Maybe my pulley looks more like yours. Do you have any pics? Maybe mine has been switched out with a newer one by the previous owner.

89 2dr 3.0 AT, manual hubs. 33x12.5 MT
gen 2 coils,Cranked front tbars
Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge

Entire Thread
Subject	Posted By	Posted
how do you torque a crank pulley bolt?	StockRaider	08/22/06 01:52 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 02:31 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:34 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 02:38 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 02:47 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:53 AM
Re: how do you torque a crank pulley bolt?	Tag	08/22/06 02:55 AM
Re: how do you torque a crank pulley bolt?	Raider_X	08/22/06 03:16 AM
Re: how do you torque a crank pulley bolt?	LandRaider	08/22/06 03:22 AM
Re: how do you torque a crank pulley bolt?	sparkem	08/22/06 03:31 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 04:28 AM
Re: how do you torque a crank pulley bolt?	FrankR	08/22/06 04:49 AM
Re: how do you torque a crank pulley bolt?	StockRaider	08/22/06 07:01 AM
Re: how do you torque a crank pulley bolt?	Mad_Scientist	08/22/06 03:36 AM
Re: how do you torque a crank pulley bolt?	52degrees	08/22/06 03:50 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: