My engine still stumbles when I go over certain bumps (not all bumps) or do steep climbs. Sometimes the stumbling is just plain random. The ôCruise Control Setö lights always illuminates for a few seconds as it stumbles. ItÆs OK to drive, mostly annoying. HereÆs what IÆve done already, based on your advice:
-Changed fuel filter
-Reset computer (disconnected battery 15 minutes)
-Cleaned MAF senor in air cleaner
-Checked plugs (still have 10K left on them)
-Visual inspection of wires for anything loose
-Checked for codes û none indicated

The only other change IÆve done is that I had a new CD installed last month. But, I thought they just plugged into the OEM harness. Could this be an issue?

I just thought I would try one more time on the board before bringing it to the dealer. Without a code, IÆm not sure what they can do.

Thanks,
Pete

'01 Rodeo Sport, 5 Speed Softie, Indy 4X rocker bars, OME 912's, Rancho 9000X's, Superwinch hubs, custom tube bumper with Warn 9000i , Flowmaster 50, TeraLow t-case gears, ARB front & rear lockers, TrXus MT's, Sway bar disconnects