3.0 not quite there after top end rebuild

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 not quite there after top end rebuild [Re: Paul_H] #746541 08/22/06 11:02 PM

Joined: Feb 2006

Posts: 29

lostone

Getting the Wheeling Fever

Re- check your vacume hoses, you may have a small leak somewhere. Another thing is it might be yor TPS. The one on my 4runner went bad after a rebuild. I also had a bad one on my chevy and it would cause the idle to surge.

Entire Thread
Subject	Posted By	Posted
3.0 not quite there after top end rebuild	Paul_H	08/22/06 05:19 PM
Re: 3.0 not quite there after top end rebuild	lostone	08/22/06 11:02 PM
Re: 3.0 not quite there after top end rebuild	Ganoid	08/22/06 11:43 PM
Re: 3.0 not quite there after top end rebuild	Paul_H	08/23/06 01:50 AM
Re: 3.0 not quite there after top end rebuild	half_fast	08/23/06 02:46 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.802s Queries: 16 (3.800s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-03 19:55:43 UTC
Valid HTML 5 and Valid CSS