3.0 to 22re swap...how involved is it.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 to 22re swap...how involved is it. [Re: swamprunner] #746665 08/23/06 04:12 AM

Joined: Feb 2001

Posts: 3,935

Minnesota

bkg

Roll Me Over

wiring, dash, motor mounts, tranny mounts, driveshafts, tranny, tcase, center console, etc, etc, etc... Been discussed before. Part out the bad truck and rebuild the 3.0.

Brian K. Gallus
I have nothing important to say.

Entire Thread
Subject	Posted By	Posted
3.0 to 22re swap...how involved is it.	swamprunner	08/23/06 01:37 AM
Re: 3.0 to 22re swap...how involved is it.	Paul_H	08/23/06 02:19 AM
Re: 3.0 to 22re swap...how involved is it.	bkg	08/23/06 04:12 AM
Re: 3.0 to 22re swap...how involved is it.	Brian894X4	08/23/06 04:36 AM
Re: 3.0 to 22re swap...how involved is it.	Red_Chili	08/23/06 05:34 PM
Re: 3.0 to 22re swap...how involved is it.	dcg9381	08/23/06 11:54 PM
Re: 3.0 to 22re swap...how involved is it.	swamprunner	08/24/06 12:55 AM
Re: 3.0 to 22re swap...how involved is it.	Snowtoy	08/23/06 11:23 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.572s Queries: 16 (3.570s) Memory: 0.6070 MB (Peak: 0.6400 MB) Data Comp: Off Server Time: 2026-06-08 20:45:54 UTC
Valid HTML 5 and Valid CSS