daystar bushing mods

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

daystar bushing mods #746682 08/23/06 03:10 AM

Joined: Aug 2003

Posts: 8

corndog74

Need a Spot

i was wondering if any of you have the daystar control arm bushings installed? if so, do you have any squeeks that you had to deal with. i noticed that the daystar bushings for my 98 taco 4x4 have grooves in them--i guess to hold grease. would i be better off getting some graphite impregnated bushings instead? thanks

Entire Thread
Subject	Posted By	Posted
daystar bushing mods	corndog74	08/23/06 03:10 AM
Re: daystar bushing mods	Mark in AZ	08/24/06 04:19 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.707s Queries: 15 (3.705s) Memory: 0.5938 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-21 03:57:08 UTC
Valid HTML 5 and Valid CSS