Quote
Forgot to clear that up.

The GEN II is M/T. The Starex (also using a 4d56 engine) is A/T. smile


Otep,

For our race truck we made an adapter to go on the feed line of the A/T. It hooks into a drill pump and we just pump right from the jug after draining the tranny from the bung plug in the bottom. Its a little slower then the specialty set up, but it works. The pump has push around 15 psi. Almost forgot, put a bucket under the tranny cooler to collect the fluid you're pumping out.

Last edited by Macka; 08/25/06 02:18 PM.
always working