Going from 3" body lift back to stock

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Going from 3" body lift back to stock [Re: Snowtoy] #747123 08/26/06 05:22 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Poly body mount bushings should not squeak, mine have never done so in about 9 years of use. In order for them to squeak, you would need to make them moving around and if that is happening, you have a bolt loose or something broken. If properly installed, they can't move around and no motion = no squeaking.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Going from 3" body lift back to stock	SolidBlk85	08/25/06 12:59 AM
Re: Going from 3" body lift back to stock	RatLabGuy	08/25/06 01:40 AM
Re: Going from 3" body lift back to stock	Andy87	08/25/06 02:48 AM
Re: Going from 3" body lift back to stock	bkg	08/25/06 03:21 AM
Re: Going from 3" body lift back to stock	Snowtoy	08/25/06 04:45 AM
Re: Going from 3" body lift back to stock	4Crawler	08/25/06 06:12 AM
Re: Going from 3" body lift back to stock	SolidBlk85	08/25/06 07:23 AM
Re: Going from 3" body lift back to stock	4Crawler	08/25/06 07:30 AM
Re: Going from 3" body lift back to stock	Greg_Canada	08/25/06 01:53 PM
Re: Going from 3" body lift back to stock	SolidBlk85	08/25/06 09:59 PM
Re: Going from 3" body lift back to stock	Snowtoy	08/26/06 05:12 AM
Re: Going from 3" body lift back to stock	4Crawler	08/26/06 05:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: