2.6L swap for 4D56

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.6L swap for 4D56 [Re: Bernoulli] #748436 09/09/06 05:01 PM

Joined: Feb 2006

Posts: 4

st charles parish near new orl...

beavsridininaraider Offline

Need a Spot

well i just completed my 2.6 gas to 4d56t transformation it went very well. Import engine cost me 2500 USD off of ebay. It takes about a month to get the motor straight from japan, but when i got it here in new orleans it was plug in play. oh yea it will get about 20mpg and lots of torque

Entire Thread
Subject	Posted By	Posted
2.6L swap for 4D56	Bernoulli	08/29/06 08:33 PM
Re: 2.6L swap for 4D56	lordtrunks	08/29/06 09:35 PM
Re: 2.6L swap for 4D56	dylanb	08/29/06 09:49 PM
Re: 2.6L swap for 4D56	Macka	08/29/06 11:49 PM
Re: 2.6L swap for 4D56	beavsridininaraider	09/09/06 05:01 PM
Re: 2.6L swap for 4D56	Macka	09/09/06 08:23 PM
Re: 2.6L swap for 4D56	dylanb	09/09/06 10:44 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 16 (3.524s) Memory: 0.6048 MB (Peak: 0.6378 MB) Data Comp: Off Server Time: 2026-06-24 02:01:47 UTC
Valid HTML 5 and Valid CSS