Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: HI-lift mount [Re: RidingRoughshod] #748954 09/05/06 03:15 PM
Joined: Sep 2005
Posts: 1,087
BobRowe Offline
Body Damage is Cool
Tomken Machine makes a couple of mounting brackets for a Hi-Lift that you bolt to your front or rear bumper. You then drop the jack into the brackets and secure it with regular bolts and nuts.


1977 CJ-7, fiberglass body, AMC 360 w/ headers, DUI ignition, Edelbrock intake and Holley 4150 carb, TF999, Dana 300, 4.56 gears lockers, York air comp, 4" susp lift, 2" body lift, BFG 35" M-T tires, Megashifter, AGR pump & box, REP8000 winch.
Re: HI-lift mount [Re: RidingRoughshod] #748955 09/05/06 04:34 PM
Joined: Jul 2005
Posts: 105
RidingRoughshod Offline OP
Wheeler
Quote
This one won't last when I get my spare so it's gonna be the roll bar mount...<img src="/forums/images/graemlins/cheers.gif" alt="" />


Way ahead of you there Jim

Page 2 of 2 1 2

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.5920 MB (Peak: 0.6565 MB) Data Comp: Off Server Time: 2026-06-21 13:14:35 UTC
Valid HTML 5 and Valid CSS