HELP!!! Crankshaft/Harmonic Balancer help needed!

Print Thread

Rate Thread

Re: HELP!!! Crankshaft/Harmonic Balancer help needed! [Re: CORunner93] #749815 09/06/06 01:30 PM

Joined: Apr 2000

Posts: 4,230

Roll Me Over

Quote

But, would locktight help any...or be OK to use. And, is it OK to go to 225 lb-ft of torque (as apposed to the 184 the FSM recommends)?

I would not recommend it. Fasteners are made for a specific torque, going above that puts the fastener and the threaded hole in danger of failure.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
HELP!!! Crankshaft/Harmonic Balancer help needed!	CORunner93	09/06/06 03:23 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	kewlynx	09/06/06 03:35 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	jasond	09/06/06 03:49 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	CORunner93	09/06/06 04:11 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	engnbldr	09/06/06 05:51 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	CORunner93	09/06/06 06:07 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	fallman	09/06/06 07:05 AM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	OOP'S	09/06/06 01:30 PM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	Staceman	09/06/06 05:12 PM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	mt_goat	09/12/06 03:26 PM
Re: HELP!!! Crankshaft/Harmonic Balancer help needed!	CORunner93	09/13/06 05:10 AM

Hop To