Whirlpool third??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Whirlpool third?? #750307 09/08/06 03:22 PM

Joined: Jul 2003

Posts: 274

Concord, NH

Myota

Mudrunner

I just swapped in a used rear end(complete) and after driving a couple of hundred miles there is this noise. Same noise that was there previous to the swap.
At 30mph it sounds like a washing machine on the wash portion of the cycle.
This sound is definitely coming from the rear.
Tires are balanced.
Wheels are true.
Nothing is rubbing.

Anyone have any ideas?
Axle bearings?
Third bearings?
Carrier berings?

-Chris

'88 EFI Xtracab, 32 x 11.50 Buckshots, AZ bed, Turbo drivetrain.

Entire Thread
Subject	Posted By	Posted
Whirlpool third??	Myota	09/08/06 03:22 PM
Re: Whirlpool third??	ErikB	09/08/06 03:57 PM
Re: Whirlpool third??	Staceman	09/08/06 04:06 PM
Re: Whirlpool third??	OOP'S	09/08/06 04:11 PM
Re: Whirlpool third??	Myota	09/08/06 04:35 PM
Re: Whirlpool third??	GOI87	09/08/06 11:19 PM
Re: Whirlpool third??	Greg_Canada	09/09/06 02:45 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.600s Queries: 15 (3.597s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-06-16 21:23:07 UTC
Valid HTML 5 and Valid CSS