Balance Shaft Elimination Kit

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Balance Shaft Elimination Kit [Re: billygoat] #750545 09/11/06 09:52 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

You can leave the plate and both balance shafts off. The dummy oil pump shaft looks like the nose of the PS balance shaft and the oil pump sprocket bolts on the front end. I remember minimal protrusion of the dummy into the PS BS bore.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Balance Shaft Elimination Kit	billygoat	09/10/06 01:01 AM
Re: Balance Shaft Elimination Kit	fasteddy	09/10/06 07:13 PM
Re: Balance Shaft Elimination Kit	billygoat	09/11/06 03:27 AM
Re: Balance Shaft Elimination Kit	fasteddy	09/11/06 09:52 PM
Re: Balance Shaft Elimination Kit	billygoat	09/12/06 12:21 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.498s Queries: 16 (3.495s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-08 12:47:41 UTC
Valid HTML 5 and Valid CSS