stainless skid plate

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: stainless skid plate [Re: Jake97T] #752111 09/19/06 03:38 AM

Joined: Sep 2006

Posts: 981

CJMT100

Rock Warrior

Stainless is not needed, its just flashy imho. I rather get some 1/4 thick strong steel (cant recall the exact designation) and fab up my own plate. A little bit of propane torch and you can bend it easy if your carefull not to heat it to much.

1996 T100, Mickey Thomson Classics, Bridgestone Dueler AT 265/75/16, custom offroad KC's.

Entire Thread
Subject	Posted By	Posted
stainless skid plate	wizardz	09/16/06 05:22 PM
Re: stainless skid plate	Jake97T	09/16/06 07:41 PM
Re: stainless skid plate	dogslovetrucks	09/18/06 10:23 PM
Re: stainless skid plate	Jake97T	09/18/06 10:26 PM
Re: stainless skid plate	dogslovetrucks	09/18/06 11:23 PM
Re: stainless skid plate	Jake97T	09/19/06 02:32 AM
Re: stainless skid plate	CJMT100	09/19/06 03:38 AM
Re: stainless skid plate	wsquaredodie	09/19/06 02:52 PM
Re: stainless skid plate	wizardz	09/22/06 01:07 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.750s Queries: 16 (4.032s) Memory: 0.6101 MB (Peak: 0.6431 MB) Data Comp: Off Server Time: 2026-06-06 15:09:50 UTC
Valid HTML 5 and Valid CSS