Anyone heard of spindle breakage?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Anyone heard of spindle breakage? #752147 09/17/06 02:49 AM

Joined: Mar 2006

Posts: 74

Colorado

btn

Getting the Wheeling Fever

Either IFS or S.A?

I know that rear shafts have been known to break or bend, but how about the front spindles?

1989 reg cab pickup, 22re, 31s, 4.56s, rear ARB, rear OME springs, RS9000s, otherwise stock.

Entire Thread
Subject	Posted By	Posted
Anyone heard of spindle breakage?	btn	09/17/06 02:49 AM
Re: Anyone heard of spindle breakage?	eightyeight	09/17/06 03:41 PM
Re: Anyone heard of spindle breakage?	Greg_Canada	09/17/06 06:33 PM
Re: Anyone heard of spindle breakage?	btn	09/18/06 01:34 AM
Re: Anyone heard of spindle breakage?	willzrunna96	09/18/06 02:04 AM
Re: Anyone heard of spindle breakage?	4Crawler	09/18/06 02:24 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.708s Queries: 15 (3.706s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-13 16:45:35 UTC
Valid HTML 5 and Valid CSS