Anyone heard of spindle breakage?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Anyone heard of spindle breakage? [Re: Greg_Canada] #752150 09/18/06 01:34 AM

Joined: Mar 2006

Posts: 74

Colorado

btn

Getting the Wheeling Fever

Not the CV joints but the part that sticks outboard from the knuckle that the hub rides on.

To me the metal on the spindles seems on the thin side...like it could be much beefer considering the load the spindles have to take.

1989 reg cab pickup, 22re, 31s, 4.56s, rear ARB, rear OME springs, RS9000s, otherwise stock.

Entire Thread
Subject	Posted By	Posted
Anyone heard of spindle breakage?	btn	09/17/06 02:49 AM
Re: Anyone heard of spindle breakage?	eightyeight	09/17/06 03:41 PM
Re: Anyone heard of spindle breakage?	Greg_Canada	09/17/06 06:33 PM
Re: Anyone heard of spindle breakage?	btn	09/18/06 01:34 AM
Re: Anyone heard of spindle breakage?	willzrunna96	09/18/06 02:04 AM
Re: Anyone heard of spindle breakage?	4Crawler	09/18/06 02:24 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.495s Queries: 16 (3.493s) Memory: 0.6030 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-20 22:24:16 UTC
Valid HTML 5 and Valid CSS