3.4L V6 swap -- a jig for drilling that starter

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.4L V6 swap -- a jig for drilling that starter [Re: WomBAT Man] #752446 09/18/06 08:48 PM

Joined: Aug 1999

Posts: 9,030

Fair Oaks, CA USA

randii

4x4Wire.com Managing Editor Emeritus

Good link, Sean -- and good to hear from you. I didn't know that WomBATs hibernated. <img src="/forums/images/graemlins/pfft.gif" alt="" />

It turns out that Uzis do, as well. <img src="/forums/images/graemlins/smile.gif" alt="" />

Randii

Entire Thread
Subject	Posted By	Posted
3.4L V6 swap -- a jig for drilling that starter	WomBAT Man	09/18/06 03:44 PM
Re: 3.4L V6 swap -- a jig for drilling that starter	randii	09/18/06 08:48 PM
Re: 3.4L V6 swap -- a jig for drilling that starter	Ed Mc	09/19/06 01:44 AM
Re: 3.4L V6 swap -- a jig for drilling that starter	BillW	09/23/06 03:25 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.834s Queries: 16 (3.832s) Memory: 0.5984 MB (Peak: 0.6314 MB) Data Comp: Off Server Time: 2026-06-10 13:34:46 UTC
Valid HTML 5 and Valid CSS