I had an after market A-arm snap in two, at the end of a trail...but that's another story.

I have had my adjusting bolts snap on me as I was trying to undo them. I think that's pretty common. The bolts have really long nuts on them with lots of threads, so once they corrode or get junk on the threads, and you try to back them out, they get locked tight and when undoing them something has to give and usually you end up twisting the bolt until it breaks, thinking that your just undoing a really tight nut.

Obviously, you should never try adjusting the bolts with weight on the truck, since they are then supporting half the truck's weight. I'm sure a few bolts have broke because of this, but mostly its because of the really long nuts and threads that lock the bolt tight when they get corroded and/or dirty.

As for breaking just sitting in a drivethrough or parked somewhere, the only explaination I have for that is that the bolt was probably already twisted and weaked from previously attempts to loosen it or tighten it. There is absolutely no reason that a stock bolt should ever just break for no reason while your driving or parked, even if they are old and original, in my opinion.


[color:"blue"]My Toyota/Expedition Website[/color]
Foreign & Military Toyotas - Expedition 4x4s
Our historical explorations & much more