How are y'all adjusting the rear pinion angle on the Gen II 4Runners ?
I haven't seen a single ad for adjustable rear upper control arms for 'em.
I've seen control arms but they are stock length with JJ's on rod ends on them to loosen the rear up a little

Surely with any amount of lift the working angles on the u-joints (rear driveshaft) are out of spec., especially those of you running 4" (or more) of suspension lift.
I suspect that a couble cardon (CV) joint rear driveshaft is required, but to use that the pinion needs to be adjusted upwards.




smile
Fred