How do you align the carrier bearing?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How do you align the carrier bearing? [Re: bobs97] #752945 09/21/06 06:11 PM

Joined: Feb 2000

Posts: 4,160

Auburn, NorCal

ErikB

Toyota Moderator

I think your best option would be another stock shaft from a junkyard.
Try http://car-part.com/

Just make sure you keep them lubed (I do mine at every oil change, as do most shops that aren't cutting corners) and you shouldn't need to be replacing u-joints.

Last edited by ErikB; 09/21/06 06:15 PM.

'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik

Entire Thread
Subject	Posted By	Posted
How do you align the carrier bearing?	bobs97	09/20/06 07:00 AM
Re: How do you align the carrier bearing?	ErikB	09/20/06 03:40 PM
Re: How do you align the carrier bearing?	wsquaredodie	09/20/06 08:37 PM
Re: How do you align the carrier bearing?	bobs97	09/21/06 03:57 AM
Re: How do you align the carrier bearing?	ErikB	09/21/06 06:11 PM
Re: How do you align the carrier bearing?	wsquaredodie	09/21/06 07:31 PM
Re: How do you align the carrier bearing?	Shedman	09/27/06 01:52 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.578s Queries: 16 (3.576s) Memory: 0.6063 MB (Peak: 0.6393 MB) Data Comp: Off Server Time: 2026-06-02 21:18:46 UTC
Valid HTML 5 and Valid CSS