remote not working/previous post didn't work

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: remote not working/previous post didn't work [Re: Lennyburger] #752976 09/20/06 01:23 PM

Joined: Aug 2003

Posts: 645

Oklahoma City, OK

Airdale73013 Offline

Rock Warrior

If it is a factory keyless entry there is a process that is outlined in the instruction manual for the keyless module that tells you how to set the code in the car's keyless module. The process takes 5 min.

2009 Sorento LX, 4x4, V6, Auto, Red

Entire Thread
Subject	Posted By	Posted
remote not working/previous post didn't work	Lennyburger	09/20/06 01:19 PM
Re: remote not working/previous post didn't work	Airdale73013	09/20/06 01:23 PM
Re: Aaaah the manual!	Lennyburger	09/20/06 01:53 PM
Re: Aaaah the manual!	Airdale73013	09/20/06 08:32 PM
Re: Aaaah the manual!	Lennyburger	09/20/06 10:58 PM
Re: Aaaah the manual!	Hal2000	09/21/06 02:03 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 16 (3.499s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-06-01 21:04:16 UTC
Valid HTML 5 and Valid CSS