Transmission oil and filter is new, and fine. I just put a used transmission in my rodeo, and the reverse is messed up. It takes about 8 seconds for rev. to ingage, then if i give it any amount of gas, its feels like its kicking out of gear. I added Sea Foam Trans Tune, thinking maybe something was gummed up from the used trannie setting around. after a week it still hasn't gotten any better.
The only thing im concerned about with my installation is the sending unit that mounts on the shifter fork on the trannie, (has about a dozen wires going into it) there is slotted holes in it for adjustment for something, only about 1/4" of adjustment. I tried moving my shifter towards Park and Drive thinking maybe the linkage wasn't adjusted right, but it doesn't get any better, anywhere in between park and drive.
any suggestions????
I got the tranny for $300.00 and it has a 2 mo warrenty, im not looking forward to having to change it again. its drivable, but what can i do to correct this, all the forward gears work perfect.
<img src="/forums/images/graemlins/confused.gif" alt="" />