Quote
How much oil was it burning?


Not sure, I didn't really drive it enough to know. And I changed the oil a couple times after the rebuild. And as for the mileage, IÆm not really sure. It might have been 4k, or it might have been 2kà

Quote
I'm guessing that when you put a straight edge to the head it'll still be flat, and the valves still seal. If that is the case, I would pull the valve springs, then re-lap the valves with lapping compound and a lapping tool (suction cup on the end of a stick.)


I didn't rebuild the head, i had my local shop do it. So i'm not sure what they origonaly did. As for what ive done to it; nothing other than take a pic. I was just going to slap the head back on and try it out, but i also thought about purchasing a new head. But i really don't have the money. I'm a newb at this so any other thought would be helpfull. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Steve C