Some more done today; <img src="/forums/images/graemlins/smile.gif" alt="" />

I installed the cam. I have 3 and I decided to use the cam the was in the ôoriginalö Amigo engine. The one that was installed the ôoriginalö head that warped. So IÆm not sure if it too is bent, but I guess IÆll find out. Also; the cam is a reground ôhotö cam. So well see what that dose.

I also cleaned up and installed the rocker arm assembly. It was one of the few things that I didnÆt take apart and clean the last time around. And boy was it dirty! The inside of the passenger side shaft was full of crud. And the holes that are supposed to let oil get to the race things where completely packed full of burnt oil.






Old thread on timing