Throttle body (throttle shaft) seals

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Throttle body (throttle shaft) seals #753610 09/23/06 04:05 AM

Joined: Nov 2005

Posts: 9

mollydawg

Need a Spot

At 290,000 miles I have a little play in the throttle shaft inside the throttle body. I believe it is the cause of a slight surging at light engine load (1800 rpm, high vacuum condition). Does anyone know if the shaft bushings/seals can be replaced and if so, where I can order new ones? Toyota is very proud of a replacement throttle body.

'96 Taco 4x4 2.7 with 270,000 miles and climbing

Entire Thread
Subject	Posted By	Posted
Throttle body (throttle shaft) seals	mollydawg	09/23/06 04:05 AM
Re: Throttle body (throttle shaft) seals	john_luttrell	09/26/06 01:31 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.547s Queries: 15 (3.545s) Memory: 0.5941 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-07-16 16:15:20 UTC
Valid HTML 5 and Valid CSS