Throttle body (throttle shaft) seals

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Throttle body (throttle shaft) seals [Re: mollydawg] #753611 09/26/06 01:31 PM

Joined: Aug 2003

Posts: 712

Waskom, Texas

john_luttrell Offline

Rock Warrior

You only got 290,000 miles out of the throttle shaft seals?? Whatta a hunk of junk!! LOL, gotta love Toyotas, almost 300K and the main complaint is a worn throttle shaft seal. Hate to say it, but you are probably stuck with either the dealership or a junk yard for that part.

John Luttrell
2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear

1991 Jeep YJ, 4 inch suspension lift on 33" BFG's

Entire Thread
Subject	Posted By	Posted
Throttle body (throttle shaft) seals	mollydawg	09/23/06 04:05 AM
Re: Throttle body (throttle shaft) seals	john_luttrell	09/26/06 01:31 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.561s Queries: 16 (3.558s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-07-17 01:40:10 UTC
Valid HTML 5 and Valid CSS