Faulty work by machine shop -- need opinions ASAP plz

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Faulty work by machine shop -- need opinions ASAP plz [Re: ChrisH] #754155 10/09/06 11:44 PM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

I ran a one-piece d-shaft for about three years. All of them were balanced but the angles were not right and most of them ended up being bent and I still ran them. In those three years I never had a problem with them other then vibration when they were bent.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/26/06 04:10 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Scerb	09/26/06 04:15 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Seattlegti	09/26/06 11:42 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	kewlynx	09/27/06 01:34 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/27/06 04:02 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	Scerb	09/27/06 05:12 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	kewlynx	09/27/06 07:16 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/27/06 11:56 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	Scerb	09/27/06 02:09 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/27/06 02:39 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/27/06 06:47 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	DentedTacoma	09/28/06 04:37 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/28/06 02:08 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/28/06 02:22 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	RichinROA	09/28/06 03:24 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/28/06 03:57 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	RichinROA	09/28/06 04:08 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	engnbldr	09/28/06 05:14 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Scerb	09/28/06 05:26 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/28/06 10:58 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Anonymous	09/29/06 01:42 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/29/06 02:04 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ACES_HI	09/29/06 03:36 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/29/06 02:51 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Jeepeater	09/30/06 07:20 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/30/06 08:25 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ACES_HI	09/30/06 11:49 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/01/06 02:12 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	kewlynx	10/02/06 02:03 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	spungo	10/03/06 09:26 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/06/06 03:36 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	bkg	10/06/06 04:54 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/06/06 05:06 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Scerb	10/06/06 11:47 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ACES_HI	10/07/06 02:11 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	10/09/06 09:44 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/09/06 06:37 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/09/06 06:42 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	10/10/06 09:56 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	10/11/06 03:26 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	RichinROA	10/11/06 04:37 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	10/12/06 01:19 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	11/16/06 10:33 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	11/21/06 10:40 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	11/21/06 04:20 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	11/21/06 04:27 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	11/21/06 04:46 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	11/25/06 10:01 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	11/28/06 03:32 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	Snowtoy	10/09/06 09:38 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	engnbldr	09/28/06 03:48 PM
Re: Faulty work by machine shop -- need opinions ASAP plz	ChrisH	09/27/06 04:06 AM
Re: Faulty work by machine shop -- need opinions ASAP plz	OOP'S	10/09/06 11:44 PM

Moderated by 4x4Wire, Mudraider

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.451s Queries: 16 (3.448s) Memory: 0.7144 MB (Peak: 0.7540 MB) Data Comp: Off Server Time: 2026-06-02 21:57:47 UTC
Valid HTML 5 and Valid CSS