The following are the steps for programming for a transmitter for a Kia factory Remote Keyless Entry (RKE).

1. Open the drivers door.

2. Turn vehicle ignition to ON position.

3. Locate programming button. Note: The programming button is attached to the RKIE module plug under the front of the of the center console. Reach this button from the drivers side.

4. Press and hold programming button 10-15 seconds, horn will sound 3 times. Release button.

5. Press Lock button on the remote transmitter. Horn will beep 1 time. Repeat this step for any additional remote transmitters (up to four).

6. Turn vehicle ignition OFF. Test remote transmitter(s) for proper operation.

END

These instructions are for US spec keyless transmitters.

I hope this helps.