rear brakes lock up on light pressure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rear brakes lock up on light pressure [Re: AUSSiE78] #754631 09/29/06 05:42 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

The LSPV adjusts the rear brake bias, the lower the rear end sits, the more "load" the LSPV thinks is on the rear axle so the more brake pressure it gets. Might try adjusting the LSPV sensing rod so that it is not so high on the valve itself:
- http://www.4crawler.com/4x4/4R_suspension.shtml#ProportioningValve

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
rear brakes lock up on light pressure	AUSSiE78	09/29/06 02:38 AM
Re: rear brakes lock up on light pressure	eightyeight	09/29/06 02:47 AM
Re: rear brakes lock up on light pressure	AUSSiE78	09/29/06 03:18 AM
Re: rear brakes lock up on light pressure	Buck	09/29/06 03:45 AM
Re: rear brakes lock up on light pressure	4Crawler	09/29/06 05:42 AM
Re: rear brakes lock up on light pressure	AUSSiE78	09/29/06 06:18 AM
Re: rear brakes lock up on light pressure	foxtrapper	09/29/06 11:35 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.907s Queries: 16 (3.905s) Memory: 0.6069 MB (Peak: 0.6399 MB) Data Comp: Off Server Time: 2026-06-18 03:25:22 UTC
Valid HTML 5 and Valid CSS