hey guys just found this site insted of opening a new thred i'll ask my qustion here about my carb , i got 86 pick up 22R ,4 speed,two wheel drive i know it's 4X2 <img src="/forums/images/graemlins/frown.gif" alt="" />but my 4X4 got totaled.
she idels high i tryed adjusting the mix,ideal screw and oh yeah i cleand the carb using carb clean , i changed out the fuel flter,air filter,replaced the cap and rotor,new plugs,new wires.
after bit of playing around i found the throtal is not closing all the way i can still push on it about a 1cm then she'll idel fine thinking it is a sticky butterfly valve i sprayed some carb cleaner to it to free it up. the engine stols after and there's a vacume leak from there as well.
now my qustion to you is that
1. if i were to use the NAPA carb rebulding kit would i get the new seals for the shaft for the butterfly valve.
2. Am i better off with buying a rebult one from NAPA which is about $500 CAD and beaing the student it's bit too much for me right now
any info would be grate
thanks in advance