Engine is out, but maybe I screwed up

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine is out, but maybe I screwed up [Re: MAC] #754945 10/01/06 12:45 AM

Joined: Mar 2004

Posts: 514

Juno Beach, FL

grandeyota Offline

Rock Warrior

When I had my engine out on the hoist I threaded a long bolt into one of the holes in the block that the tranny bolts to. Then I had a THICK flathead screwdriver I then had someone jam in the teeth of the flywheel holding it still. The bolts came off no problem with the breaker bar. Just kinda scary watching that screwdriver flex <img src="/forums/images/graemlins/scared.gif" alt="" /> Make sure you use something stout!!

Fur clog in the sausage grinder

Entire Thread
Subject	Posted By	Posted
Engine is out, but maybe I screwed up	MAC	10/01/06 12:27 AM
Re: Engine is out, but maybe I screwed up	grandeyota	10/01/06 12:45 AM
Re: Engine is out, but maybe I screwed up	vtown	10/01/06 02:21 AM
Re: Engine is out, but maybe I screwed up	missouriman	10/01/06 04:51 AM
Re: Engine is out, but maybe I screwed up	half_fast	10/01/06 05:28 AM
Re: Engine is out, but maybe I screwed up	MAC	10/02/06 01:30 AM
Re: Engine is out, but maybe I screwed up	vtown	10/01/06 03:33 PM
Re: Engine is out, but maybe I screwed up	ChrisH	10/01/06 03:41 PM
Re: Engine is out, but maybe I screwed up	mnwolftrack	10/02/06 12:05 AM
Re: Engine is out, but maybe I screwed up	MAC	10/02/06 01:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: