|
|
|
|
 Lower Ball Joint revisted
#755189
10/02/06 01:09 AM
|
Joined: Jul 2003
Posts: 140
OP
Wheeler
|
So when I was in a jam on Friday, I searched a bunch and found a few threads about Zerk fittings for the lower ball joints. This thread shows a ball joint with the Zerk fitting coming out of the side. The ones I took out of mine were "supposed" to be on the top. I noticed a while back that my Zerks were gone. Maybe some gremlin in the night took them. This turned out to be a bad thing. Keep an eye on your Zerks! ![[Linked Image]](http://www.imagestation.com/picture/sraid216/p71122cb1acd846fc926308fa40bf4166/ecb97414.jpg)
[color:"blue"]Carey[/color][b]
[b][color:"red"]89 SR5 Extended Cab 4X4 V6
[/color][color:"blue"]Don't forget to pay your taxes......
Millions of illegal aliens are depending on you!!![/color]
|
|
|
Entire Thread
|
Lower Ball Joint revisted
|
Myredyota
|
10/02/06 01:09 AM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.506s Queries: 15 (3.504s) Memory: 0.5927 MB (Peak: 0.6257 MB) Data Comp: Off Server Time: 2026-06-09 00:25:37 UTCValid HTML 5 and Valid CSS 
