am i not doing this right?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: am i not doing this right? [Re: gentouteg] #755301 10/03/06 03:40 PM

Joined: Feb 2000

Posts: 4,160

Auburn, NorCal

ErikB

Toyota Moderator

I ordered mine online, but if you can find a place that carries OTC or snap-on they'd probably have it. You don't need it to measure the clearance though, just to swap shims.

'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik

Entire Thread
Subject	Posted By	Posted
am i not doing this right?	gentouteg	10/02/06 06:19 AM
Re: am i not doing this right?	ErikB	10/02/06 03:33 PM
Re: am i not doing this right?	gentouteg	10/03/06 05:27 AM
Re: am i not doing this right?	ErikB	10/03/06 03:40 PM
Re: am i not doing this right?	eleet	10/09/06 09:07 AM
Re: am i not doing this right?	ErikB	10/09/06 06:43 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.702s Queries: 16 (3.700s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-14 14:34:54 UTC
Valid HTML 5 and Valid CSS