the best way to backprobe a connector ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: the best way to backprobe a connector ? [Re: Wayne] #755471 10/03/06 08:39 PM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

I have a few rolls of 20 GA SOLID core wire for this very purpose. You can use it to test things because you can wrap it around things and it stays, or strip some insulation off and stick it into a connector. You can get it at radioshack for $5.99

Don't pierce the insulation, not really worth it, just wrap a piece around the probe and put the other end in the connector.

Last edited by CPOM; 10/03/06 08:40 PM.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
the best way to backprobe a connector ?	trooperbc	10/03/06 07:03 AM
Re: the best way to backprobe a connector ?	Wayne	10/03/06 07:18 AM
Re: the best way to backprobe a connector ?	CPOM	10/03/06 08:39 PM
Re: the best way to backprobe a connector ?	trooperbc	10/05/06 04:28 AM
Re: the best way to backprobe a connector ?	Troopersphere	10/03/06 11:00 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.277s Queries: 16 (3.637s) Memory: 0.6011 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-19 06:40:02 UTC
Valid HTML 5 and Valid CSS