High pitched noise after timing chain install.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: High pitched noise after timing chain install. [Re: BrokeAsAJoke] #755550 10/04/06 12:15 PM

Joined: Sep 2005

Posts: 53

utah

wr250

Getting the Wheeling Fever

check the ps adjuster pulley. bearing can go out and make noise like you describe.

85 runner -dual cases, headlight harness, 34" TSL's
86 toy buggy getting sas'ed with a 14 bolt rear - 8.5" 10 bolt front (this will go away when i find a 60)

Entire Thread
Subject	Posted By	Posted
High pitched noise after timing chain install.	BrokeAsAJoke	10/03/06 10:09 PM
Re: High pitched noise after timing chain install.	wr250	10/04/06 12:15 PM
Re: High pitched noise after timing chain install.	DRTDEVL	10/05/06 10:33 PM
Re: High pitched noise after timing chain install.	trythis	10/04/06 02:26 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.479s Queries: 16 (3.477s) Memory: 0.5981 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-06-08 13:21:40 UTC
Valid HTML 5 and Valid CSS