Cylinder head removal Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cylinder head removal Question [Re: Oyaji_Jon] #755625 10/05/06 04:46 AM

Joined: Dec 2000

Posts: 6,896

Ponchatoula, LA

sparkem

Trail Leader

3.0 is 22mm.

I just want to tell you both good luck, and we're all counting on you.

Entire Thread
Subject	Posted By	Posted
Cylinder head removal Question	Thor	10/04/06 04:11 AM
Re: Cylinder head removal Question	sparkem	10/04/06 04:35 AM
Re: Cylinder head removal Question	Oyaji_Jon	10/04/06 05:36 AM
Re: Cylinder head removal Question	Thor	10/04/06 08:36 AM
Re: Cylinder head removal Question	fasteddy	10/05/06 03:02 AM
Re: Cylinder head removal Question	Oyaji_Jon	10/05/06 03:45 AM
Re: Cylinder head removal Question	sparkem	10/05/06 04:46 AM
Re: Cylinder head removal Question	yankneck696	10/05/06 10:34 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.135s Queries: 16 (4.132s) Memory: 0.6078 MB (Peak: 0.6408 MB) Data Comp: Off Server Time: 2026-11-04 06:13:59 UTC
Valid HTML 5 and Valid CSS