Damn transfer case filler bolt....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

hammer and chisel [Re: yodta] #755763 10/05/06 09:00 PM

Joined: Oct 2006

Posts: 6

leiniesred Offline

Need a Spot

It is OK if you chisel off a chunk or two while you try to back it off. It seals around the edges, usually, you get enough of the edges off and it screws right out. get a new plug while you are out air tool shopping. I too like the socket head plugs.

Entire Thread
Subject	Posted By	Posted
Damn transfer case filler bolt....	ciscofreak	10/04/06 11:39 PM
Re: Damn transfer case filler bolt....	J94_4runner	10/05/06 01:11 AM
Re: Damn transfer case filler bolt....	5150	10/05/06 02:37 AM
Re: Damn transfer case filler bolt....	willzrunna96	10/05/06 02:52 AM
Re: Damn transfer case filler bolt....	4Crawler	10/05/06 03:05 AM
Re: Damn transfer case filler bolt....	Pluton	10/05/06 04:11 AM
Re: Damn transfer case filler bolt....	ciscofreak	10/05/06 05:01 PM
Re: Damn transfer case filler bolt....	krb90	10/05/06 05:26 PM
Re: Damn transfer case filler bolt....	yodta	10/05/06 06:40 PM
hammer and chisel	leiniesred	10/05/06 09:00 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.776s Queries: 16 (3.773s) Memory: 0.6120 MB (Peak: 0.6450 MB) Data Comp: Off Server Time: 2026-06-15 06:25:01 UTC
Valid HTML 5 and Valid CSS