3.0 Manifold Heat Shield?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

3.0 Manifold Heat Shield? #755768 10/05/06 02:33 AM

Joined: Mar 2006

Posts: 92

New Brunswick Canada

5150

Getting the Wheeling Fever

While changing the plugs and wires on my 93 V6, I noticed the drivers side manifold heat shield had fallen off the mounting bolts. It is still in the area of the manifold however it is just laying there. The question I have, is there any way to reattach this or should I just get a new one from the stealership?

Entire Thread
Subject	Posted By	Posted
3.0 Manifold Heat Shield?	5150	10/05/06 02:33 AM
Re: 3.0 Manifold Heat Shield?	OOP'S	10/05/06 03:19 AM
Re: 3.0 Manifold Heat Shield?	Toy4x	10/05/06 03:45 PM
Re: 3.0 Manifold Heat Shield?	USMCTRD	10/05/06 06:53 PM
Re: 3.0 Manifold Heat Shield?	Paul_H	10/05/06 07:06 PM
Re: 3.0 Manifold Heat Shield?	Rauch_Off_Road	10/05/06 07:16 PM
Re: 3.0 Manifold Heat Shield?	5150	10/05/06 09:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.512s Queries: 15 (3.509s) Memory: 0.6042 MB (Peak: 0.6372 MB) Data Comp: Off Server Time: 2026-06-04 19:33:06 UTC
Valid HTML 5 and Valid CSS