3.0 Manifold Heat Shield?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 Manifold Heat Shield? [Re: 5150] #755770 10/05/06 03:45 PM

Joined: Jan 2000

Posts: 454

South FL to South GA

Toy4x

Mudrunner

I believe there are also some shields that attach to the manifolds, mounted with small studs/nuts. Maybe the studs rusted off, or the nuts backed off (doubtful).
Those shields are not *required* imho

Entire Thread
Subject	Posted By	Posted
3.0 Manifold Heat Shield?	5150	10/05/06 02:33 AM
Re: 3.0 Manifold Heat Shield?	OOP'S	10/05/06 03:19 AM
Re: 3.0 Manifold Heat Shield?	Toy4x	10/05/06 03:45 PM
Re: 3.0 Manifold Heat Shield?	USMCTRD	10/05/06 06:53 PM
Re: 3.0 Manifold Heat Shield?	Paul_H	10/05/06 07:06 PM
Re: 3.0 Manifold Heat Shield?	Rauch_Off_Road	10/05/06 07:16 PM
Re: 3.0 Manifold Heat Shield?	5150	10/05/06 09:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.497s Queries: 16 (3.495s) Memory: 0.6042 MB (Peak: 0.6372 MB) Data Comp: Off Server Time: 2026-06-03 00:12:29 UTC
Valid HTML 5 and Valid CSS