3.0 Manifold Heat Shield?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 Manifold Heat Shield? [Re: Toy4x] #755771 10/05/06 06:53 PM

Joined: Mar 2005

Posts: 94

Camp Lejuene, NC

USMCTRD

Getting the Wheeling Fever

My driver side one fell off. I found it a couple weeks later at the power line trail. You could reattach them with some bigger washers if the studs/nuts aren't to rusted. I don't think they're that important though.

88 V6 4Runner, 2" 4Crawler body lift, 2" suspension, 32x11.50 Pro Comps

Entire Thread
Subject	Posted By	Posted
3.0 Manifold Heat Shield?	5150	10/05/06 02:33 AM
Re: 3.0 Manifold Heat Shield?	OOP'S	10/05/06 03:19 AM
Re: 3.0 Manifold Heat Shield?	Toy4x	10/05/06 03:45 PM
Re: 3.0 Manifold Heat Shield?	USMCTRD	10/05/06 06:53 PM
Re: 3.0 Manifold Heat Shield?	Paul_H	10/05/06 07:06 PM
Re: 3.0 Manifold Heat Shield?	Rauch_Off_Road	10/05/06 07:16 PM
Re: 3.0 Manifold Heat Shield?	5150	10/05/06 09:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.6043 MB (Peak: 0.6373 MB) Data Comp: Off Server Time: 2026-06-03 02:29:35 UTC
Valid HTML 5 and Valid CSS