3.0 Manifold Heat Shield?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 Manifold Heat Shield? [Re: 5150] #755772 10/05/06 07:06 PM

Joined: Dec 2004

Posts: 136

Eagle River, AK

Paul_H

Wheeler

I'd say use big washers over the existing shield and re-attach it. I just did a head rebuild, and can attest that it's a PITA to reach the nuts/bolts on the shield. If you're rusted out thats and even bigger pita.

'94 extra-cab 3.0 extra slo (auto tranny) original owner. E/B o/s valve heads and no more crossover. More mods to come.

Entire Thread
Subject	Posted By	Posted
3.0 Manifold Heat Shield?	5150	10/05/06 02:33 AM
Re: 3.0 Manifold Heat Shield?	OOP'S	10/05/06 03:19 AM
Re: 3.0 Manifold Heat Shield?	Toy4x	10/05/06 03:45 PM
Re: 3.0 Manifold Heat Shield?	USMCTRD	10/05/06 06:53 PM
Re: 3.0 Manifold Heat Shield?	Paul_H	10/05/06 07:06 PM
Re: 3.0 Manifold Heat Shield?	Rauch_Off_Road	10/05/06 07:16 PM
Re: 3.0 Manifold Heat Shield?	5150	10/05/06 09:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.518s Queries: 16 (3.516s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-13 08:10:42 UTC
Valid HTML 5 and Valid CSS