aligning an SAS'd rig

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: aligning an SAS'd rig [Re: eightyeight] #755776 10/05/06 03:53 PM

Joined: Feb 2000

Posts: 4,160

Auburn, NorCal

ErikB

Toyota Moderator

Camber isn't adjustable on a Toy axle. Sometimes people run slightly higher camber and toe numbers on modifed rigs to compensate for bigger tires, etc. and its not a problem. Sounds like you are "good to go."

'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik

Entire Thread
Subject	Posted By	Posted
aligning an SAS'd rig	eightyeight	10/05/06 02:35 AM
Re: aligning an SAS'd rig	ErikB	10/05/06 03:53 PM
Re: aligning an SAS'd rig	dcg9381	10/05/06 09:55 PM
Re: aligning an SAS'd rig	4Crawler	10/05/06 10:02 PM
Re: aligning an SAS'd rig	lethe	10/05/06 11:49 PM
Re: aligning an SAS'd rig	eightyeight	10/06/06 04:22 AM
Re: aligning an SAS'd rig	4Crawler	10/06/06 04:55 AM
Re: aligning an SAS'd rig	dcg9381	10/06/06 05:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 16 (3.490s) Memory: 0.6080 MB (Peak: 0.6410 MB) Data Comp: Off Server Time: 2026-06-13 00:01:24 UTC
Valid HTML 5 and Valid CSS