aligning an SAS'd rig

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: aligning an SAS'd rig [Re: 4Crawler] #755779 10/05/06 11:49 PM

Joined: Jul 2005

Posts: 232

everett washington

lethe

Wheeler

i've been told that for toyotas the tires should be toed in about and 1/8" on each side. has anyone else heard this?

87' ext cab toy

Entire Thread
Subject	Posted By	Posted
aligning an SAS'd rig	eightyeight	10/05/06 02:35 AM
Re: aligning an SAS'd rig	ErikB	10/05/06 03:53 PM
Re: aligning an SAS'd rig	dcg9381	10/05/06 09:55 PM
Re: aligning an SAS'd rig	4Crawler	10/05/06 10:02 PM
Re: aligning an SAS'd rig	lethe	10/05/06 11:49 PM
Re: aligning an SAS'd rig	eightyeight	10/06/06 04:22 AM
Re: aligning an SAS'd rig	4Crawler	10/06/06 04:55 AM
Re: aligning an SAS'd rig	dcg9381	10/06/06 05:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.920s Queries: 16 (3.918s) Memory: 0.6072 MB (Peak: 0.6402 MB) Data Comp: Off Server Time: 2026-06-11 06:29:52 UTC
Valid HTML 5 and Valid CSS